Basic Transmission Settings; Contrast; Resolution - Panasonic Panafax DX-2000 User Manual

You can temporarily change the transmission settings either before or after you place the document on the ADF.
These settings are as follows;

• Contrast

• Resolution

• Halftone
• Stamp
After your document has been sent, your machine will automatically return to the preset settings.
Contrast (see Note 1)
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press CONTRAST to:
CONTRAST = Normal
Resolution
Your machine is preset to Fine resolution, this setting is suitable for most business documents. If required, this
setting can be changed to Normal or 400 dpi.
Press RESOLUTION CONTRAST
RESOLUTION = Standard
Compatibility with Other 400 dpi Machines
• G3: DX-1000, DX-2000, UF-595, UF-885, UF-895 and other manufacturer's 400 dpi compatible machines.
• Internet Fax: DX-1000, DX-2000, PC email Recipients and other manufacturer's 400 dpi compatible Internet
Fax machines.
(see Note 2)
(see Note 3)
Note: 1. To change the preset Contrast position, change the setting of Fax Parameter No. 001, see page 72.
2. To change the preset Resolution position, change the setting of Fax Parameter No. 002, see page 72.
3. If you send a photographic document with Halftone set to Fast or Quality and the Resolution set to Super Fine (406
x 391 dpi), the reproduction of the received document will be determined by the capability of the remote station.

Basic Transmission Settings

DARKER
LIGHTER
CONTRAST
CONTRAST = Lighter
to:
400 dpi
FINE
RESOLUTION RESOLUTION
RESOLUTION = Fine
DARKER
LIGHTER
CONTRAST CONTRAST
CONTRAST = Darker
400 dpi
FINE
RESOLUTION
RESOLUTION = 400 dpi
DARKER
LIGHTER
400 dpi
FINE
4
79