Error Message Sent To The Sender; Internet Fax Return Receipt Errors Messages - Panasonic Panafax DX-2000 User Manual

Email ABBR Programming Errors

Error Message Sent to the Sender

Error messages that are emailed from the DX-2000 to the original sender during remote programming of the
One-Touch / ABBR No. via email.
1 554 Data transfer error (broken header)
2 554 Data transfer error (broken data)
3 554 Data transfer error (FAX module)
4 554 MIME attachment not supported
(message/file)
5 554 MIME format not supported
6 554 G3 relay permission denied
7 554 Relay address unknown
8 554 Memory full (FAX module)
9 554 Data transfer error

Internet FAX Return Receipt Errors Messages

Error messages that are printed on the Internet Fax Return Receipt when remote programming of the One-Touch
/ ABBR No. via email fails.
1 Format Error : <@list block, the "@end" command is
missing.>
2 Format Error : <@command block, the "@end"
command is missing.>
3 Format Error : <@begin block, the "@begin"
command is missing.>
4 Format Error : <@begin block, the "@end"
command is missing.>
5 Format Error : <@system block,the "@end"
command is missing.>
6 Format Error : <@sender block,the "@end"
command is missing.>
7 Format Error:<@domain block,the "@end"
command is missing.>
8 Format Error : <@program block,the "@end"
command is missing.>
9 Format Error:<@system block,the "@system"
command is missing.>
10 Permission denied : <Fax Forward parameter is set
to "Valid".>
11 Permission denied : <Fax machine is busy
performing a task.>
12 Error : <Progarammed ABBR overwrite prohibited.
Use open ABBR only.>
13 Permission denied : <Password is incorrect.>
14 Permission denied : <Remote Dialer Update
parameter is set to "Invalid".>
15 Format Error : <error line>
16 Warning : <error line>
17 Warning : Field limit exceeded<error line>
Error message
Error message
Troubleshooting
Possible cause
The header or sub header decoding is being processed while
the message finished, try again.
Multiple contents are present and being processed while the
message finished, try again.
Data transfer error occurred in the FAX module while
communicating with the LAN module, try again.
MIME attachment is not supported during this operation, re-
send using plain text in the message body only.
MIME file type is not supported, re-send using plain text in the
message body only.
The requested domain for Relayed XMT is not registered.
The telephone number of end receiving station for the Relayed
XMT is unknown.
FAX Memory is full, try again later.
Other errors not listed above, try again later.
Possible cause
The block termination command "@end" is missing in the
"@list" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@command" block, add the "@end" command and try again.
The block start command "@begin" is missing in the "@begin"
block, add the "@begin" command and try again.
The block termination command "@end" is missing in the
"@begin" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@system" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@sender" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@domain" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@program" block, add the "@end" command and try again.
The system block start command "@system" is missing in the
"@system" block, add the "@system" command and try again.
Change the Fax Forward parameter to "Invalid" and try again.
Try again later when the machine is not busy.
Can not overwrite existing programmed data, use the "Delete"
command to erase the existing data first.
Correct the password and try again.
Set the Remote Dialer Update parameter to "Valid".
The format of the Entry is incorrect / incomplete or the data
string for each station is not defined within a single line.
The format of the Entry is incorrect or the number of characters
entered, exceed the maximum allowed in the field. Correct it
and try again.
The maximun number of the station name is exceeded.
8
189