Setting the Number of Average Measurements
1.
Set the Power switch to On or press
the Reset button to prepare the
instrument for measurement.
•
n-1, n-2, and so on (up to n-5)
will appear.
2.
Press the Reset button for 5 s. The number of average
measurements will switch as follows:
3.
Release the Reset button when the required number of average
measurements is displayed.
•
If n-2 through n-5 is selected,
AVG appears in the upper left
corner of the display.
•
The selected number of average
measurements will be recorded.
Page 5 - 4
Jaundice Meter (Model JM-103) User Manual (usr070rb)