Section 4: Installation And Assembly; Installation; Charging The Battery - Konica Minolta JM-103 User Manual

Installation

Before using the instrument, charge and inspect the instrument.

Charging the Battery

When using the instrument for the first time, ensure that it is fully
charged. To maintain a full charge at all times, place the instrument on
the charger unit when it is not being used for measurements. When the
battery power is low, the Battery display blinks.
If the Jaundice Meter is left uncharged for a long period of time, the
power of the battery diminishes; ensure that it is charged prior to use. To
charge the Jaundice Meter, perform the following:
WARNING:
The charger unit (Model JM-A30) and the AC adapter (Model JM-
A31) are solely designed for use with the Jaundice Meter (JM-
103). Use them only when charging the instrument. Using them
to charge other equipment could result in personal injury or
equipment damage.
1. Plug the AC adapter into the DC jack
of the charger unit. Use only the
charger unit and AC adapter supplied
with the Jaundice Meter.
NOTE:
The shape of the AC adapter varies
according to region.
NOTE:
120V model shown.
Jaundice Meter (Model JM-103) User Manual (usr070rb)
Installation and Assembly
Section 4
Page 4 - 1