Change The Viewing Angle Of Your Phone - Cisco 7811 User Manual

Your Phone
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5 Return the handset to the handset rest.

Change the Viewing Angle of Your Phone

You can change the angle of the phone to eliminate glare on the screen.
Procedure
Step 1
Unplug the phone from the network.
Step 2 Place the phone so that the keypad faces the desktop.
Step 3 Grasp one side of the footstand with one hand and place your other hand on the phone.
Step 4 Hold down the phone and pull up on the footstand.
Step 5
Turn the footstand over.
Step 6 Push the footstand back into the phone until the stand locks into place.
Step 7 Place the phone upright and plug it into the network.
Change the Viewing Angle of Your Phone
Cisco IP Phone 7800 Series User Guide
3