Adjust Phone Display Viewing Angle - Cisco 8961 Features

Features of Your Cisco Unified IP Phone
Procedure
Step 1 Insert the curved connectors into the lower slots.
Step 2 Lift the footstand until the connectors snap into the upper slots.
Note

Adjust Phone Display Viewing Angle

The viewing angle of the phone display can be adjusted according to your preference.
Procedure
Hold the handset and cradle with your left hand, hold the right side of the bezel (to the right of the display)
with your right hand, and then move your hands back and forth in opposite directions to adjust the angle.
The following figure shows the display angle of the Cisco Unified IP Phone 9971.
Connecting and disconnecting the footstand may require a little more force than you expect.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
Adjust Phone Display Viewing Angle
29