Connect To The Network; Connect To Expressway; Activate And Sign Into Your Phone; Sign Into Your Phone - Cisco 7811 User Manual

Connect to the Network

Connect to the Network
Your phone needs to be connected to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
• Mobile and Remote Access through Expressway—After the phone is connected to the network, it is set

Connect to Expressway

You can connect into your corporate network when you are working away from your office using Mobile and
Remote Access Through Expressway.
When your phone detects that it is not at the office, you are prompted to connect to your corporate network
through Expressway.
Before You Begin
If you have been using your phone at the office or with a VPN, reset your service mode before you connect
to Expressway.
If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone
and press Select when prompted.
Procedure
Step 1 Enter your activation code or service domain on the Welcome screen.
Step 2 Enter your username and password.
Step 3
Press Submit.

Activate and Sign Into Your Phone

You may need to activate your phone or sign into your phone. Activation happens once for your phone, and
connects the phone to the call control system. Your administrator gives you your sign in and activation
credentials.

Sign into Your Phone

Before You Begin
Get your userid and PIN or password from your administrator.
Cisco IP Phone 7800 Series User Guide
4
up to automatically connect to the Expressway server.
Your Phone