[Panorama Assist] - Panasonic Lumix DMC-ZR3 Operating Instructions Manual

You can take pictures with connections suitable for creating panorama images.
w Setting the recording direction
Press / to select the recording direction and then press
1
[MENU/SET].
• The horizontal/vertical guideline will be displayed.
2
Take the picture.
•
You can retake the picture by selecting [RETAKE].
3 Press  to select [NEXT] and then press [MENU/SET].
•
You can also press the shutter button halfway to set the menu.
•
Part of the recorded image is displayed as a transparent image.
4
Take picture after moving the camera horizontally or
vertically so the transparent image overlaps.
•
When taking the hird and later pictures, repeat steps
•
You can retake the picture by selecting [RETAKE].
Press / to select [EXIT] and then press [MENU/SET].
5
Note
•
It will be a normal motion picture recording during the motion picture recording.
•
The flash setting is fixed to [Œ].
• The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•
We recommend using a tripod. When it is dark, we recommend using the self-timer for taking
pictures.
•
When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set
to [OFF], shutter speed may slow down up to 8 seconds.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
The recorded images can be combined into panorama pictures using the software
"PHOTOfunSTUDIO 5.0 HD Edition" on he CD-ROM (supplied).
Advanced (Recording pictures)

[PANORAMA ASSIST]

- 65 -
3 4
and .