Compensating The Exposure - Panasonic LUMIX DC-FT7 Operating Instructions For Advanced Features

4. Focus, Brightness (Exposure) and Colour tone Settings

Compensating the Exposure

Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press 3 (È).
2
Press 2/1 to compensate the exposure and
then press [MENU/SET].
• The exposure compensation value appears on the
screen.
• Select [0] to return to the original exposure.
Underexposed
Compensate the exposure
towards positive.
• You can set the exposure compensation value in the range between j5 EV and
Settings can be made within a range of
recording 4K photos, or recording in [Post Focus].
• When the exposure value is out of the j3 EV to i3 EV range, the brightness of the recording
screen will no longer change.
It is recommended to record by checking the actual brightness of the recorded image in the
Auto Review or playback screen.
• The set exposure value is memorised even if the camera is turned off. (When [Exposure
Comp. Reset] (P136)
Properly exposed
j
3 EV to
is set to [OFF])
Compensate the exposure
i
3 EV while recording motion pictures,
70
+1 +1
- 5 - 5 - 4 - 4 - 3 - 3 - 2 - 2 - 1 - 1 0 0 +1 +1 +2 +2 +3 +3 +3 +3 +3 +3 +4 +4
Overexposed
towards negative.
i 5 EV.
+5 +5