Installation
Releasing the carriage
Cabling
1-6
Release the scanner carriage
•
Connect your scanner and computer
•
Check the SCSI ID
•
Your scanner has a locking screw at the bottom to protect the
scanner carriage mechanism during shipping. Before you can
operate the scanner, you need to disengage the locking screw.
To unlock the scanner:
With the scanner turned off, turn the scanner on its side to see
1
the locking screw at the bottom.
Using a screwdriver, turn the locking screw counterclockwise
2
to unlock it. When unlocked successfully, the screw will push
out a little, becoming nearly even with the bottom of the
scanner.
You can check the lock's status by pushing on the screw cap.
If the screw springs back, the scanner is ready for scanning.
turn screw
counterclockwise
The following scenarios are provided to show how to connect
your scanner to the computer and the other components you
may have in your system.