Table of Contents
Advertisement
Save button
Add button
Check button
3-96
Shortcut to creating duplicate scan jobs:
Hold down the Shift key and drag the mouse. A duplicate
scan job is created based on the current scan job, and a dupli-
cate title is added in the Scan Job window.
The Save button lets you save the settings in a scan job to a
scan job template that can be used for future scan jobs.
To use the Save button:
Click on the Save button.
1
When a dialog box appears, give a name to the scan job tem-
2
plate to be saved, then click OK.
The Add button lets you add a scan job from a scan job tem-
plate saved previously.
To use the Add button:
Click on the Add button.
1
When a dialog box appears, specify the name of the scan job
2
template to be added, then click Add. To close the dialog box,
click Close.
The Check button allows you to select the scan jobs to be
scanned. When you then click on the Scan button to start
scanning, the scan jobs marked by a check are the ones that
will be scanned. The Check button is a toggle.
To use the Check button:
In the Title area of the Scan Job window, select the scan job to
1
be scanned.
Click on the Check button. A check will appear next to the
2
selected scan job.
To uncheck a selection, select the scan job to be unchecked,
3
and click on the Check button again. The scan job will be
unchecked, and the scan job will not be scanned when you
click on the Scan button.
Advertisement
Table of Contents
