Removing And Installing The Power Supply Fan - Siemens SIMATIC IPC677D Operating Instructions Manual

7.7.6

Removing and installing the power supply fan

Requirement
● The device is opened.
● The power supply has been removed.
Procedure
Removal
1. Pull out the plug of the power supply fan
2. Loosen the four screws
3. Take the power supply fan out of the enclosure.
Installation
Note
Install only a fan of the same type. Note the correct mounting position of the fan.
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
①
.
②
on the enclosure.
Maintaining and servicing your device
7.7 Removing and installing hardware
97