Siemens SIMATIC IPC677D Operating Instructions Manual page 80

Expanding the device and assigning device parameters
6.4 Drives
4. Loosen the designated screws on
the inside of the cover.
5. Remove the cover of the external
drive and the drive bay from the
device.
6. Pull the connector of the SATA
cable from the drive.
7. Loosen the four screws that con-
nect the optical drive with the drive
bay and pull out the optical drive to
the front from the drive bay.
Installing external drive
Proceed in reverse order.
80
Operating Instructions, 09/2014, A5E32995420-AC
SIMATIC IPC677D