Profinet Status Displays - Siemens SIMATIC IPC677D Operating Instructions Manual

1.2.3

PROFINET status displays

PROFINET status display
Display
①
PROFINET,
optional
Virtual status displays
The two "virtual" CP 1616 LEDs can only be seen in the SIMATIC software and can be scanned via
SNMP.
PROFINET
See also
Industry Automation and Drive Technologies - Homepage
(http://www.siemens.com/automation/service&support)
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
Meaning
Status display for
SF
CP 1616 onboard
Virtual LEDs
LED Description
OFF
CP not available
•
CP disabled
•
No error, communication
•
established
Download in progress
•
Slow flashing
Link status error
•
IO controller: IO device cannot
•
be addressed
IO controller: Duplicate IP
•
address
Fast flashing Exception error: Diagnostics via
Web or SNMP no longer possible
AN
Diagnostic information
•
available
No communication
•
established.
RUN CP is active
STOP CP is in the stop state
Flashes There are no "slow flashing" or
"fast flashing" states.
Overview
1.3 Accessories
17