Siemens SIMATIC IPC677D Operating Instructions Manual page 161

Power
System parameters
Wake on PME or LAN 2 (X2 P1)
Auto Wake on S5
Wake on S5 Time
Day of Month
Wake on LAN 1 (X1 P1)
PROFINET always On
PROFINET Wake Capability
USB Ports 0/1 (X61/X60) powered
USB Ports 0/1 (X61/X60) Wake Capability
USB Ports 4/5 (X63/X62) powered
USB Ports 4/5 (X63/X62) Wake Capability
USB Ports 3/6/8/9 powered
USB Port 3/6/8/9 Wake Capability
Only visible if the "Auto Wake on S5" is set accordingly.
1
Visible depending on the ordered device configuration
2
Only visible if the parameter "PROFINET always On" is enabled.
3
Only visible if the associated parameter "USB Ports # powered" is enabled.
4
Power > Advanced CPU Control
System parameters
P-States (ACTUAL)
Active Processor Cores
HT Support
Execute Disable Bit
Intel (VMX) Virtualization Technology
C-States
Turbo Mode
Boot
System parameters
Boot Type
Quick Boot
Quiet Boot
Network Stack
PXE Boot capability
Add Boot Options
USB Boot
EFI Device First
Boot Delay Time
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
1
1
2
2 3
4
Default settings
Disabled
Disabled
00:00:00
1
Enabled
Disabled
Disabled
Enabled
Disabled
4
Enabled
Disabled
4
Enabled
Disabled
Default settings
Enabled
All Cores
Auto
Enabled
Enabled
Enabled
Enabled
Default settings
Dual Boot Type
Enabled
Enabled
Disabled
Disabled
Auto
Enabled
Enabled
3
Technical information
8.6 BIOS description
Local settings
Local settings
Local settings
161