Siemens SIMATIC IPC677D Operating Instructions Manual page 107

1. Make sure that the partition on which you want to install the operating system is large
enough and is set up with a NTFS file system.
The recommended minimum size of this partition varies, depending on the operating
system, how much RAM you have available and how much additional software you want
to use. Information on how the data medium is partitioned in its factory state is available
in the tables below.
2. Select the partition on which you want to install the operating system.
3. Click "Next".
Installation is started. The Windows operating system is installed on the data medium.
Windows 7 partitions in the factory state
Partition
First
Second
Third
Information for systems with RAID controller or AHCI controller
Data carrier controllers unknown to the operating system must be made known to the
operating system prior to installation in the "Install Windows" installation program.
Requirement
You have copied the relevant controller driver to a USB stick.
Procedure
1. Connect the USB stick with the controller driver to the device.
2. Start the "Install Windows" installation program as described above.
3. Select "Load Drivers" in the Windows installation window.
4. Select the respective driver on the USB stick.
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
Name Size
BOOT 100 MB
SYSTEM 100 GB
DATA Remainder
Maintaining and servicing your device
7.8 Installing the software
File system
Automatically set up by
installation program
NTFS not compressed
NTFS not compressed
107