4,2.7 F7 - A/D Count; F8 - Zero; F9 - Pin - KERN CPB 3K1M Service Manual

4,2.7 F7 - A/D COUNT

To enter this parameter, press the [Tare] key when "
This parameter allows you to view the A/D counts from the internal A/D converter. This
can be an aid to service.
Press the [Tare] key to return to the PARAMETER menu.
Press the key to return to normal weighing.
Typical value at zero is 30,000-90,000 (approx.)
Typical value at full capacity is 500,000 (approx.)

4.2.8 F8 - ZERO

The scale can be selected to use a normal method to determine zero, "
alternative method "
To enter this parameter, press the [Tare] key when "
The display will show the selected zero mode.
Press the key to change the value.
Press [Tare] to accept "

4.2.9 F9 - PIN

To change the user Pin number to gain access
To enter this parameter, press the [Tare] key when "
The display will show "
Enter the new Pin number.
CPB-SH-e-0721
Mode 2
". For all CPB-M scales set this option to "
Mode 1
".
Pin 1
"
Press the [Tare] key to accept.
F7
" is shown.
F8
" is shown.
to the Service Parameters.
F9
" is shown.
Mode 1
" or an
Mode 1
".
14