Count With Freely Selectable Reference Quantity < Free - KERN CDS 4K0.02 Operating Instructions Manual

9.2.3 Count with freely selectable reference quantity < FrEE >.
Put the empty container on the weighing platform and press the TARE button.
The container is tared, the zero display will appear.
Fill the container with any number of reference pieces
Press and hold the key, the numerical input window appears. The
corresponding active digit is flashing.
Enter the number of reference pieces, for the numerical input see chap. 3.2.2
The balance will calculate the average item weight and then displays the
quantity of pieces.
Remove reference weight. The balance is now in piece counting mode counting
all units on the weighing plate.
Fill the counting quantity. The piece quantity is shown directly in the display.
With the
TCDS-BA-e-2210
key you can switch between piece quantity and weight display.
28