Cleaning - Jungheinrich ERE 120 Operating Instructions Manual

4.4

Cleaning

4.4.1 Cleaning the truck
CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
Disconnect the battery before starting cleaning work.
Carry out all necessary safety measures to prevent sparking before cleaning (e.g.
by short-circuiting).
CAUTION!
Risk of component damage when cleaning the truck
Cleaning with a pressure washer can result in malfunctions due to humidity.
Cover all electronic system assemblies (controllers, sensors, motors etc.) before
cleaning the truck with a pressure washer.
Do not hold the jet of the pressure washer by the marked points to avoid damaging
them (see "Identification Points and Data Plates" on page 29).
Do not clean the truck with pressurised water.
139