Cleaning The Laser Scanner Front Screen - Jungheinrich EFX 413 Operating Instructions Manual

7.4

Cleaning the laser scanner front screen

Z
The material required to clean the front screen of the laser scanner is outlined in
"Consumables", see page 329.
Requirements
– Laser scanner under the load axle:
Load handler fully lowered, see page 171.
Attachment in home position, see page 192.
– Laser scanner in the drive compartment:
Drive compartment cover removed, see page 334.
Procedure
• Damp clean the front screen.
Z
Dry cleaning carries the risk of static charge. More dust will be attracted to the
front screen. Moreover, there is also the risk of scratching the front screen.
• In addition, damp clean the connecting lug at the bottom of the front screen.
Wipe the screen dry with a clean, soft woollen cloth, a microfibre cloth or a new
soft paper towel.
CAUTION!
Cleaning can damage the front screen
Do not use dirty or large-fibre cleaning cloths as these can scratch the front screen.
A scratched front screen will result in faults. The front screen must be replaced.
• After cleaning, hold a light or torch against the front screen. Check for any
contamination or scratches on the front screen and clean again if necessary.
The front screen is now clean.
240