Avalue Technology SENX-BYT User Manual
  1. Manuals
  2. Brands
  3. Avalue Technology Manuals
  4. Motherboard
  5. SENX-BYT
  6. User manual

Avalue Technology SENX-BYT User Manual

Intel celeron soc j1900 processor nano itx motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SENX-BYT
Intel® Celeron® SoC J1900 Processor
Nano ITX Motherboard
User's Manual
st
Ed – 19 November 2014
1
Part No. E2047SNXB00R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SENX-BYT and is the answer not in the manual?

Questions and answers

Related Manuals for Avalue Technology SENX-BYT

Summary of Contents for Avalue Technology SENX-BYT

  • Page 1 SENX-BYT Intel® Celeron® SoC J1900 Processor Nano ITX Motherboard User’s Manual Ed – 19 November 2014 Part No. E2047SNXB00R...
  • Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...

  • Page 3: Technical Support

    SENX-BYT User’s Manual otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.

  • Page 4: Table Of Contents

    Using Setup ....................29 Getting Help ....................30 In Case of Problems ..................30 BIOS setup ....................31 3.6.1 Main Menu .................... 31 3.6.1.1 System Language ................. 32 3.6.1.2 System Date ................. 32 3.6.1.3 System Time ................. 32 4 SENX-BYT User’s Manual...
  • Page 5 3.6.6.10 Launch EFI Shell from filesystem device ........108 4. Drivers Installation..................... 109 Install Chipset Driver .................. 110 Install Video Driver ..................111 Install LAN Driver (For Realtek 8111G Gigabit Ethernet) ......112 Install Audio Driver (For Realtek ALC662 HD Audio) ......... 113 SENX-BYT User’s Manual 5...
  • Page 6 SENX-BYT User’s Manual Install MBI Driver ..................114 Install TXE Driver ..................115 5. Mechanical Drawing ....................116 6 SENX-BYT User’s Manual...

  • Page 7: Getting Started

    Before you begin installing your single board, please make sure that the following materials have been shipped:  Motherboard x 1  SATA cable x 1  SATA Power cable x 1  Driver/Utility CD x 1 SENX-BYT User’s Manual 7...

  • Page 8: Document Amendment History

    SENX-BYT User’s Manual 1.3 Document Amendment History Revision Date Comment November 2014 Avalue Initial Release 8 SENX-BYT User’s Manual...

  • Page 9: Manual Objectives

    We strongly recommend that you study this manual carefully before attempting to set up SENX-BYT series or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance.

  • Page 10: Specifications

    1 x VGA  Rear Side External 2 x USB 2.0  I/O Connector 1 x USB 3.0  1 x COM port (Pin 9 without power)  1 x SD card slot support SD/ SDHC Card  10 SENX-BYT User’s Manual...
  • Page 11  mode windows will be described in manual. HDMI Output,1152 x 864 / 1280 x 768 / 1280 x 800 / 1280 x 960 / 1360 x 768 / 1366 x 768 / 1400 x  SENX-BYT User’s Manual 11...
  • Page 12 Center Image, it won’t have problem if set as VGA Output Screen shows noise under DOS mode  Power interruption can’t be supported under 0.2 / 0.1 second.  Reset Sequence May Not Complete Under Certain Conditions  Note: Specifications are subject to change without notice. 12 SENX-BYT User’s Manual...

  • Page 13: Architecture Overview-Block Diagram

    SENX-BYT User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of SENX-BYT. Dual channel 18/24 DDR3L 1333/1600 Onboard eMMC Ext HDMI Ext VGA bit LVDS SODIMM, up to 8GB BOM Optional 1 x 2 x 3 pin, pitch 2.0mm connector...

  • Page 14: Hardware Configuration

    SENX-BYT User’s Manual 2. Hardware Configuration 14 SENX-BYT User’s Manual...

  • Page 15: Product Overview

    SENX-BYT User’s Manual 2.1 Product Overview SENX-BYT User’s Manual 15...
  • Page 16 SENX-BYT User’s Manual 16 SENX-BYT User’s Manual...

  • Page 17: Installation Procedure

    4. Connect power supply to the board via the DC Jack. 5. Turn on the power. 6. Enter the BIOS setup by pressing the delete key during boot up. Use the "Save & Exit \ Restore Defaults" feature. SENX-BYT User’s Manual 17...

  • Page 18: Jumper And Connector List

    Label Function Note F_PANEL1 Front Panel Switches 2 x 5 header, pitch 2.54 mm MPCIE1 Mini-PCI-e connector HDMI connector HDMI DC in +12V DC Jack ATX_12V Speaker connector 1 x 4 wafer, pitch 2.00 mm JSPK 18 SENX-BYT User’s Manual...
  • Page 19 Inverter connector 1 x 6 wafer, pitch 2.00 mm JDEBUG DEBUG connector (for android only) 1 x 2 header, pitch 2.54 mm LVDS1 LVDS connector 2 x 15 header, pitch 2.00 mm SIM1 SIM card slot SENX-BYT User’s Manual 19...

  • Page 20: Setting Jumpers & Connectors

    SENX-BYT User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT2) Normal* Clear CMOS Define Open Normal Short Clear CMOS * Default 2.4.2 ME update (For Flash BIOS use) (JME) Open* Short * Default 20 SENX-BYT User’s Manual...

  • Page 21: Lvds Vcc Jumper (Jpwr_Lvds1)

    SENX-BYT User’s Manual 2.4.3 LVDS VCC jumper (JPWR_LVDS1) +3.3V* +12V * Default 2.4.4 Front Panel Switches (F_PANEL1) Signal PIN PIN Signal +HD_LED +P_LED -HD_LED -P_LED PWR_ON -PWR_ON SENX-BYT User’s Manual 21...

  • Page 22: Speaker Connector (Jspk)

    SENX-BYT User’s Manual 2.4.5 Speaker connector (JSPK) Signal INTSPL+ INTSPR- Note: Support 3W 8ΩX 2 speaker. Mapping connector PHR-4. 2.4.6 CPU Fan connector (CFAN1) Signal Control +12V Ground 22 SENX-BYT User’s Manual...

  • Page 23: Sata Power Connector (Sata Power)

    SENX-BYT User’s Manual 2.4.7 SATA Power connector (SATA Power) Signal Max current 2.4.8 Inverter connector (Inverter) Signal Max current +12V +12V BLK_ON Brightness SENX-BYT User’s Manual 23...

  • Page 24: Lvds Connector (Lvds1)

    DTX2- DCLK+ DTX2+ DTX1- DTX0- Note: DTX1+ DTX0+ 1. Mapping connector 1 x 2 x 15 pin, pitch 2.0mm connector. 2. The VCC voltage can be change by JPWR_LVDS1 jumper. (Page.21) 2.4.10 Battery connector (JBAT) Signal 24 SENX-BYT User’s Manual...

  • Page 25: General Purpose I/O Connector (Gpio1)

    2.4.11 General Purpose I/O connector (GPIO1) Signal PIN PIN Signal GPIO_S522 GPIO_S524 GPIO_S523 GPIO_S525 VCC3 (1.8V) Note: The pin 6 only supported VCC 1.8V. 2.4.12 DEBUG connector (JDEBUG) Signal PIN PIN Signal GPIO_S0_SC57 GPIO_S0_SC61 Note: For android debug Pin. SENX-BYT User’s Manual 25...

  • Page 26: Gigabit Lan (Rj-45) Connector (Lan1)

    Orange Linked Green connection 1Gbps Blinking Data activity Orange connection Note: This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED. 26 SENX-BYT User’s Manual...

  • Page 27: Bios Setup

    SENX-BYT User’s Manual 3.BIOS Setup SENX-BYT User’s Manual 27...

  • Page 28: Introduction

    If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press DEL to enter setup, F11 to popup menu 28 SENX-BYT User’s Manual...

  • Page 29: Using Setup

    Note: Some of the navigation keys differ from one screen to another.  To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. SENX-BYT User’s Manual 29...

  • Page 30: Getting Help

    AMI and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 30 SENX-BYT User’s Manual...

  • Page 31: Bios Setup

    <Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. SENX-BYT User’s Manual 31...

  • Page 32: System Language

    Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced BIOS settings This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 32 SENX-BYT User’s Manual...

  • Page 33: Acpi Settings

    SENX-BYT User’s Manual 3.6.2.1 ACPI Settings SENX-BYT User’s Manual 33...
  • Page 34 SENX-BYT User’s Manual 34 SENX-BYT User’s Manual...
  • Page 35 Select ACPI sleep state the system Suspend Disabled ACPI Sleep State will enter when the SUSPEND S3 (Suspend to RAM) [Default] button is pressed. Disabled[Default] Enables or Disables Lock of Legacy Lock Legacy Resources Enabled Resources. SENX-BYT User’s Manual 35...

  • Page 36: Power Management Configuration

    SENX-BYT User’s Manual 3.6.2.2 Power Management Configuration 36 SENX-BYT User’s Manual...
  • Page 37 SENX-BYT User’s Manual SENX-BYT User’s Manual 37...
  • Page 38 SENX-BYT User’s Manual 38 SENX-BYT User’s Manual...
  • Page 39 When enabled, System Disabled[Default] Wake system with Dynamic Time will wake on the current time + Enabled Increase minute(s) Notice: Please disable EUP function. Enable/Disable LAN to wake the Disabled[Default] Wake on LAN Enabled system. SENX-BYT User’s Manual 39...

  • Page 40: Lan Configuration

    SENX-BYT User’s Manual 3.6.2.3 LAN Configuration Item Options Description Disabled Enable or Disable LAN Controller. LAN Controller Enabled[Default] 40 SENX-BYT User’s Manual...

  • Page 41: It8772E Super Io Configuration

    You can use this item to set up or change the IT8772E Super IO configuration for serial ports. Please refer to 3.6.2.4.1 and 3.6.2.10.2 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). 3.6.2.4.1 Serial Port 1 Configuration SENX-BYT User’s Manual 41...
  • Page 42 SENX-BYT User’s Manual Item Option Description Enabled[Default], Enable or Disable Serial Port Serial Port Disabled (COM). Auto[Default] IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 Select an optimal setting for Change Settings IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 Super IO device. IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 42 SENX-BYT User’s Manual...

  • Page 43: It8772E Hw Monitor

    The following system temperature, fan speed and voltage are monitored. Temperature:  System Temperature  CPU Thermistor Temperature Fan Speed:  System Fan Speed  CPU Fan speed Voltage:  VCORE  DIMM Voltage  VCC3 SENX-BYT User’s Manual 43...

  • Page 44: Cpu Configuration

    SENX-BYT User’s Manual 3.6.2.6 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. 44 SENX-BYT User’s Manual...
  • Page 45 SENX-BYT User’s Manual SENX-BYT User’s Manual 45...
  • Page 46 SENX-BYT User’s Manual 46 SENX-BYT User’s Manual...
  • Page 47 SENX-BYT User’s Manual Item Options Description All[Default], Number of cores to enable in each processor Active Processor Cores package. Disabled[Default], Limit CPUID Maximum Disabled for Windows XP. Enabled SENX-BYT User’s Manual 47...

  • Page 48: Ppm Configuration

    When enabled, a VMM can utilize the Disabled, Intel Virtualization Technology additional hardware capabilities provided by Enabled[Default] Vanderpool Technology. Disabled[Default] Power Technology Energy Efficient Enable the power management features. Custom 3.6.2.7 PPM Configuration 48 SENX-BYT User’s Manual...
  • Page 49 SENX-BYT User’s Manual SENX-BYT User’s Manual 49...
  • Page 50 Enabled[Default] Disabled, CPU C state Report Enable/Disable CPU C state report to OS. Enabled[Default] This option controls Max C state that the Max CPU C-state C1/C6/C7[Default] processor will support. Disabled[Default], S0ix Enable/Disable CPU S0ix state. Enabled 50 SENX-BYT User’s Manual...

  • Page 51: Sata Configuration

    SENX-BYT User’s Manual 3.6.2.8 SATA Configuration SENX-BYT User’s Manual 51...
  • Page 52 SENX-BYT User’s Manual 52 SENX-BYT User’s Manual...
  • Page 53 SENX-BYT User’s Manual SENX-BYT User’s Manual 53...
  • Page 54 SENX-BYT User’s Manual 54 SENX-BYT User’s Manual...
  • Page 55 Enable/Disable Serial ATA. Disabled, Enabled SATA Test Mode Test Mode enable/disable. Disabled[Default], Gen1 SATA Speed Support SATA Speed Support Gen1 or Gen2. Gen2[Default] Port0 ODD SATA ODD Port Port1 ODD SATA ODD is Port0 or Port1. No ODD[Default] SENX-BYT User’s Manual 55...

  • Page 56: Miscellaneous Configuration

    SENX-BYT User’s Manual IDE Mode SATA Mode Select IDE/AHCI. AHCI Mode[Default] Enabled[Default] Serial-ATA Port 0/1 Enable/Disable Serial ATA Port0/1. Disabled, Enabled SATA Port0/1 HotPlug Enable/Disable SATA Port0/1 HotPlug. Disabled[Default], 3.6.2.9 Miscellaneous Configuration 56 SENX-BYT User’s Manual...
  • Page 57 SENX-BYT User’s Manual SENX-BYT User’s Manual 57...

  • Page 58: Lpss & Scc Configuration

    Boot time calculation with Hight Precision Boot Timer with HPET Timer Disabled[Default], Event Timer Enabled. PCI Express Dynamic Clock Enabled Enable/Disable PCIE Dynamic Clock Gating. Gating Disabled[Default], Windows 8.X[Default] OS Selection Android OS Selection. Windows 7 3.6.2.10 LPSS & SCC Configuration 58 SENX-BYT User’s Manual...
  • Page 59 SENX-BYT User’s Manual SENX-BYT User’s Manual 59...
  • Page 60 SENX-BYT User’s Manual 60 SENX-BYT User’s Manual...
  • Page 61 SENX-BYT User’s Manual SENX-BYT User’s Manual 61...
  • Page 62 SENX-BYT User’s Manual 62 SENX-BYT User’s Manual...
  • Page 63 LPSS & SCC Devices Mode PCI mode Settings. Enabled eMMC 4.5 Support[Default] Enable eMMC 4.41 Support SCC eMMC Support SCC eMMC Support eMMC AUTO MODE Enable/Disable. Disabled, SCC eMMC 4.5 DDR50 Support Enabled[Default], SCC eMMC 4.5 DDR50 Support SENX-BYT User’s Manual 63...

  • Page 64: Csm Configuration

    Enabled[Default], SCC SD Card Support SCC SD Card Support Disabled Enable/Disable. Enabled[Default], Disable/Enable DDR50 DDR50 Support for SDCard Disabled Capability in SD Card controller. Enabled MIPI HSI Support MIPI HSI Support Disabled[Default], Enable/Disable. 3.6.2.11 CSM Configuration 64 SENX-BYT User’s Manual...
  • Page 65 SENX-BYT User’s Manual SENX-BYT User’s Manual 65...
  • Page 66 SENX-BYT User’s Manual 66 SENX-BYT User’s Manual...
  • Page 67 SENX-BYT User’s Manual SENX-BYT User’s Manual 67...
  • Page 68 SENX-BYT User’s Manual 68 SENX-BYT User’s Manual...
  • Page 69 UEFI [Default] Storage OpROM. Legacy Do not launch Controls the execution of UEFI and Legacy Video UEFI Video OpROM. Legacy[Default] Determines OpROM execution policy for UEFI[Default] Other PCI devices devices other than Network, Storage, or Legacy, Video. SENX-BYT User’s Manual 69...

  • Page 70: Usb Configuration

    SENX-BYT User’s Manual 3.6.2.12 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. 70 SENX-BYT User’s Manual...
  • Page 71 SENX-BYT User’s Manual SENX-BYT User’s Manual 71...
  • Page 72 SENX-BYT User’s Manual 72 SENX-BYT User’s Manual...
  • Page 73 SENX-BYT User’s Manual SENX-BYT User’s Manual 73...
  • Page 74 Maximum time the device will take before it properly reports itself to the Host Controller. Auto[Default] ‘Auto’ uses default value: for a Root port it is Device power-up delay Manual 100ms, for a Hub port the delay is taken form Hub descriptor. 74 SENX-BYT User’s Manual...

  • Page 75: Chipset

    SENX-BYT User’s Manual 3.6.3 Chipset 3.6.3.1 North Bridge SENX-BYT User’s Manual 75...

  • Page 76: Intel Igd Configuration

    SENX-BYT User’s Manual Item Option Description Dynamic[Default] 2 GB 2.25 GB Max TOLUD Maximum Value of TOLUD. 2.5 GB 2.75 GB 3 GB 3.6.3.1.1 Intel IGD Configuration 76 SENX-BYT User’s Manual...
  • Page 77 SENX-BYT User’s Manual SENX-BYT User’s Manual 77...
  • Page 78 SENX-BYT User’s Manual 78 SENX-BYT User’s Manual...
  • Page 79 SENX-BYT User’s Manual SENX-BYT User’s Manual 79...
  • Page 80 SENX-BYT User’s Manual 80 SENX-BYT User’s Manual...
  • Page 81 SENX-BYT User’s Manual SENX-BYT User’s Manual 81...
  • Page 82 SENX-BYT User’s Manual 82 SENX-BYT User’s Manual...
  • Page 83 SENX-BYT User’s Manual SENX-BYT User’s Manual 83...
  • Page 84 Select the Aperture Size. 256MB[Default] Enabled[Default], DOP CG Enable/Disable DOP Clock Gating. Disabled GTT Size Select the GTT Size. 2MB[Default] Enabled, IGD Thermal Enable/Disable IGD Thermal. Disabled[Default] Enabled, Enable/Disable Spread Spectrum Spread Spectrum clock Disabled[Default] clock. 84 SENX-BYT User’s Manual...

  • Page 85: Lcd Control

    ISP PCI Device Selection ISP PCI Device as B0D2F0 Windows Boot. Linux Boot to Select ISP PCI Device as B0D3F0 Enabled, Enable or Disable Vcc Vnn Config Vcc_Vnn Config for Power state2 Disabled[Default] for Power State2. 3.6.3.1.2 LCD Control SENX-BYT User’s Manual 85...
  • Page 86 VGA modes will be supported only on primary display. Select the Active LFP Configuration. No No LVDS[Default] LVDS:VBIOS does not enable LVDS. eDP Active LFP eDP Port-C Port-C:LFP Driven by Int-Display Port encoder from Port-C. (CH7511) 86 SENX-BYT User’s Manual...

  • Page 87: South Bridge

    SENX-BYT User’s Manual 3.6.3.2 South Bridge Item Option Description Disabled Enable or Disable the High High Precision Timer Enabled[Default] Precision Event Timer. SENX-BYT User’s Manual 87...

  • Page 88: Azalia Hd Audio

    SENX-BYT User’s Manual 3.6.3.2.1 Azalia HD Audio 88 SENX-BYT User’s Manual...
  • Page 89 SENX-BYT User’s Manual SENX-BYT User’s Manual 89...
  • Page 90 SENX-BYT User’s Manual 90 SENX-BYT User’s Manual...
  • Page 91 SENX-BYT User’s Manual SENX-BYT User’s Manual 91...
  • Page 92 Azalia PME Enable Disabled capability of Audio Controller. Enabled[Default], Enable/Disable internal HDMI codec for Azalia HDMI Codec Disabled Azalia. Enabled[Default], HDMI Port B Enable/Disable HDMI Port B. Disabled Enabled[Default], HDMI Port B Enable/Disable HDMI Port C. Disabled 92 SENX-BYT User’s Manual...

  • Page 93: Usb Configuration

    SENX-BYT User’s Manual 3.6.3.2.2 USB Configuration SENX-BYT User’s Manual 93...
  • Page 94 SENX-BYT User’s Manual 94 SENX-BYT User’s Manual...
  • Page 95 SENX-BYT User’s Manual SENX-BYT User’s Manual 95...
  • Page 96 SENX-BYT User’s Manual 96 SENX-BYT User’s Manual...
  • Page 97 SENX-BYT User’s Manual Item Option Description PCI mode USB OTG Support Enable/Disable USB OTG Support. Disabled[Default] ON[Default] VBUS Should be ON in HOST mode. It USB VBUS should be OFF in OTG device mode. SENX-BYT User’s Manual 97...

  • Page 98: Pci Express Configuration

    Control each of the USB ports (0~3). Enable: Enabled[Default], USB Per Port Control Enable USB per port; Disable: Use USB port Disabled X settings. Enabled[Default], USB Port 1/2/3/4 Enable/Disable USB Port 1/2/3/4. Disabled 3.6.3.2.3 PCI Express Configuration 98 SENX-BYT User’s Manual...
  • Page 99 SENX-BYT User’s Manual SENX-BYT User’s Manual 99...
  • Page 100 SENX-BYT User’s Manual 100 SENX-BYT User’s Manual...
  • Page 101 SENX-BYT User’s Manual SENX-BYT User’s Manual 101...
  • Page 102 SENX-BYT User’s Manual 102 SENX-BYT User’s Manual...
  • Page 103 SENX-BYT User’s Manual SENX-BYT User’s Manual 103...
  • Page 104 Prefetchable Memory 0-31 Prefetchable Memory Alignment (0-31 bits). Alignment Reserved I/O (4K/8K/12K/16K/…./48K) Reserved I/O Range for this Root Bridge. Enabled[Default], Enable or Disable the PCI Express Port 1 in PCI Express Port 1 Disabled the Chipset. 104 SENX-BYT User’s Manual...

  • Page 105: Security

    Reserved I/O Range for this Root Bridge. Enabled[Default], Enable or Disable the PCI Express Port 1 in PCI Express Port 2 Disabled the Chipset. Disabled[Default] PCI Express Active State Power ASPM Management settings. L0sL1 AUTO 3.6.4 Security SENX-BYT User’s Manual 105...

  • Page 106: Boot

    Enables or disables boot with Disabled[Default] initialization of a minimal set of devices Fast Boot Enabled required to launch active boot option. Has no effect for BBS boot options. Boot Option #1/2/3 Set the system boot order. 106 SENX-BYT User’s Manual...

  • Page 107: Save And Exit

    Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 3.6.6.5 Save Changes Save Changes done so far to any of the setup options. SENX-BYT User’s Manual 107...

  • Page 108: Discard Changes

    This option restores all BIOS settings to the user defaults. This option is useful for restoring previously preserved custom BIOS setup configurations. 3.6.6.10 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. 108 SENX-BYT User’s Manual...

  • Page 109: Drivers Installation

    SENX-BYT User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. SENX-BYT User’s Manual 109...

  • Page 110: Install Chipset Driver

    Windows 8 operating system. Step 3. Select Install. Step 4. Select Finish to complete Step 1. Select Next to continue installation. Installation. Step 2. Select Accept to the next step. 110 SENX-BYT User’s Manual...

  • Page 111: Install Video Driver

    Windows 8 operating system. Step 3. Select Next to continue installation. Step 1. Select Next to start setup. Step 4. Select Next. Step 2. Select Yes to the next step. Step 5. Select Finish to complete Installation. SENX-BYT User’s Manual 111...

  • Page 112: Install Lan Driver (For Realtek 8111G Gigabit Ethernet)

    Note: The installation procedures and Step 3. Click Finish to complete setup. screen shots in this section are based on Windows 8 operation system. Step 1. Click Next to Install. Step 2. Click Install to begin the installation. 112 SENX-BYT User’s Manual...

  • Page 113: Install Audio Driver (For Realtek Alc662 Hd Audio)

    Note: The installation procedures and screen shots in this section are based on Windows 8 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. SENX-BYT User’s Manual 113...

  • Page 114: Install Mbi Driver

    Windows 8 operating system. Step 3. Select Next to continue installation. Step 4. Select Finish to complete Step 1. Select Next to start setup. Installation. Step 2. Select Yes to the next step. 114 SENX-BYT User’s Manual...

  • Page 115: Install Txe Driver

    Windows 8 operating system. Step 3. Select Next to continue installation. Step 4. Select Finish to complete Step 1. Select Next to start setup. Installation. Step 2. Select Next to the next step. SENX-BYT User’s Manual 115...

  • Page 116: Mechanical Drawing

    SENX-BYT User’s Manual 5. Mechanical Drawing 116 SENX-BYT User’s Manual...
  • Page 117 SENX-BYT User’s Manual Unit: mm SENX-BYT User’s Manual 117...
  • Page 118 SENX-BYT User’s Manual Unit: mm 118 SENX-BYT User’s Manual...

Table of Contents