Installation Procedure - Avalue Technology SENX-BYT User Manual

Intel celeron soc j1900 processor nano itx motherboard
Table of Contents

Advertisement

SENX-BYT User's Manual

2.2 Installation Procedure

This chapter explains you the instructions of how to setup your system.
1. Turn off the power supply.
2. Insert the DIMM module (be careful with the orientation).
3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat
panel. A CRT monitor must be connected in order to change BIOS settings to support flat
panel.
4. Connect power supply to the board via the DC Jack.
5. Turn on the power.
6. Enter the BIOS setup by pressing the delete key during boot up. Use the "Save & Exit \
Restore Defaults" feature.
SENX-BYT User's Manual 17

Advertisement

Table of Contents
loading

Table of Contents