SENX-BYT User's Manual
3.6.6
Save and exit
3.6.6.1 Save Changes and Exit
Exit system setup after saving the changes.
3.6.6.2 Discard Changes and Exit
Exit system setup without saving any changes.
3.6.6.3 Save Changes and Reset
Reset the system after saving the changes.
3.6.6.4 Discard Changes and Reset
Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The setup program then exits and reboots the controller.
3.6.6.5 Save Changes
Save Changes done so far to any of the setup options.
SENX-BYT User's Manual 107