Table of Contents
Advertisement
5 Configuration
Usually, bar codes are used to configure the hand-held scanner. Select the desired bar code and scan it
(see chapter 2.3). The configuration is then immediately accepted and executed.
A second option is to configure the hand-held scanner with the USB and RS 232 interfaces with the aid of the
VisualXpress PC program. You can download and install this program from our homepage at
www.leuze.com. The program can be used to make settings and transfer them to the hand-held scanner. The
configuration can also be stored so that it can be reused at a later time.
The standard applications are described and summarized below.
Leuze electronic
IT1911i
11
Advertisement
Table of Contents
