Mira Elite ST Installation Manual page 4

17. Electric showers can deliver scalding temperatures if not operated, installed or
maintained in accordance with the instructions, warnings and cautions contained
in this guide and on or inside the shower.
18. Rapid or excessive operation of the shower controls may result in high or
unstable outlet water temperatures. Operate controls gradually and allow 10-15
seconds to stabilise checking the temperature before entering the shower.
19. This shower is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of
the shower by a person responsible for their safety.
20. Children should be supervised to ensure that they do not play with the shower.
21. Always switch off the shower at the electrical isolating switch when not in use.
22. The showerhead must be de-scaled regularly.
23. DO NOT allow the handset to spray water directly on to the shower. Eg. When
cleaning shower control.
24. If the shower is not to be used for a long period, the water supply to the shower
must be isolated. If the shower or pipe-work is at risk of freezing during this
period, they should also be drained of water.
If any of the following conditions occur, isolate the electricity and water supplies
and refer to "To contact us", on the back page of this guide.
• If the cover is not correctly fitted and water has entered the shower case
• If the case is damaged
• If the shower begins to make an odd noise, smell or smoke
• If the shower shows signs of a distinct change in performance indicating a need
for maintenance
• If the shower is frozen
4