Spare Parts - Mira Elite ST Installation Manual

215 12 Thermal Trip Pack
416 38 Clamp Bracket
416 41 Thermal Switch
416 48 Latching Switch
416 51 Solenoid Coil Assembly
428 56 Cover Seal (not shown)
428 59 Service Tunnel (White)
1674 018 Service Tunnel (Satin)
428 61 Transfer/Inlet Tubes
428 62 Motor/Pump Assembly
872 01 Microswitch N/O - 2 pin
872 28 Microswitch C/O - 3 pin
1563 516 Outlet Connector
1563 504 Heater Tank 9.8 kW
Heater Tank 10.8 kW (refer to note: 'Important' below)
1677 210
1563 748 P/C Flow Valve Assembly 9.8 kW
P/C Flow Valve Assembly 10.8 kW (refer to note: 'Important' below)
1563 749
1563 509 Switch Assembly
1563 604 Cover Assembly (White)
1674 017 Cover Assembly (Satin)
1563 605 Component Pack - components identified 'A' (White)
1674 019 Component Pack - components identified 'A' (Satin)
1563 606 Terminal Block Assembly
1563 607 Wire Harness Assembly
1563 608 Screw Pack - components identified 'B'
1563 679 Filter Assembly Spare
1563 687 Filter Tube and Seal Pack - components identified 'C'
1563 691 Filter
Important! 10.8 kW flow valves and 10.8 kW heater tanks are NOT interchangable
with 9.8 kW models. The fitting of 10.8 kW spares on 9.8 kW models will void the
warranty on the product.

SPARE PARTS

22