Table of Contents
Advertisement
Filter - Cleaning/Renewing
Read the section 'Important Safety Information' first.
1.
Electrical supply is turned
off at the mains.
4.
Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning plated or plastic fittings. These finishes should be cleaned
with a mild washing up detergent or soap solution, and then wiped dry using a soft
cloth.
Spray Plate Assembly - External
1.
Use your thumb or a soft cloth to
wipe any limescale from the soft
nozzles and the front surface of the
showerhead spray plate.
Important! The Showerhead must
be de-scaled regularly to make sure
that the spray plates do not become
blocked.
MAINTENANCE
2.
Turn water supply fully
off.
Press down on the filter cover and turn
anti-clockwise to release.
Remove the filter cover and filter.
Clean the filter and wipe the inside of the
filter housing to remove any debris.
Replace the filter ensuring it is located over
the pins in the filter body.
Refit in reverse order, making sure that the
O-ring is correctly seated.
21
3.
Remove the four screws
and the Cover.
Hide quick links:
Advertisement
Table of Contents
