Table of Contents
Advertisement
Maintenance
User Maintenance - Cleaning
Many household cleaners contain abrasives and chemical
substances, and should not be used for cleaning plated or plastic
fittings. These finishes should be cleaned with a mild washing up
detergent or soap solution, and then wiped dry using a soft cloth.
Note! If any of the button lights are flashing or pulsing continuously
(in excess of 15 seconds) this may indicate that the button is stuck,
this can be avoided by keeping the unit clean.
Poor shower performance can be avoided by cleaning the
spray plate. Use thumb or soft cloth to wipe rubber nozzles. The
showerhead must be descaled regularly to stop the showerhead
getting blocked.
13
Advertisement
Table of Contents
