Channel Settings - Strong SRT 24HY4003 User Manual

5.4.6 ATV Manual Tuning (in DVB-T/C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press
ENTER to access. Highlight and press  to select Storage To 1 (maybe other number), Sound System
and Channel No.. Then select search and press ENTER to start the search. Press  for the unit to search
towards higher frequency. Press  for the unit to search towards lower frequency. The search stops when
a programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press MENU.
Fine-Tune
Use this option to make small adjustments to tuning of an individual channel. Fine-tune is not
necessary under normal conditions. However, in area of inferior broadcast conditions where adjustments
is necessary for a better picture and sound, use ne-tune. Select a channel that you want to ne tune. In
the Channel menu, select ATV Manual Tuning and press  to highlight Fine-Tune. Press   to ne tune
until the best possible picture and sound are obtained.

5.4.7 Channel settings

Programme Edit
Signal Information
Cl information
5 V Antenna Power
5.4.8 Options
OSD Language
Audio Languages/Subtitle Languages
TTX Language
Time
HDMI CEC
Factory Default
SW Version
Software Update (USB)
Note:
Audio Languages, Subtitle languages only works under DVB-S/DVB-C/DVB-T mode.

User data on this TV will be completely lost after operating this feature.

Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Showing the information of current DTV channel.
Enables the user to select from the CAM-provided menu. Select the Cl menu
based on the menu PC card.
This option is only available in DVB-T source, select On to supply power for
the TV's antenna. Select O to turn o this function.
Select the OSD language.
Select as you prefer.
Select TTX Ianguage for di erent regions.
Can setup Auto Sync, Clock, Time Zone, Summer Time, Sleep Timer and Auto
Sleep.
Press to enter into submenus.
HDMI CEC: Turn on or o HDMI CEC function.
Auto Standby: Turn the TV to standby automatically.
Device List: When HDMI CEC is ON, you can check the list of connected
devices.
Restore user setting to the default.
Displays the current software version and the model name
Connect a USB device with upgrading software to upgrade the TV system.
11