Maintenance; Maintenance Schedule - Craftsman ZT 7000 Operator's Manual

MAINTENANCE SCHEDULE
The following schedubs should be followed for normal care of your rider and mower,
RIDER MAINTENANCE, AH Mode_s
Before Spring 8 25 100 200 Yearly
Each Use & Fall Hours Hours Hours Hours
Cban Debris from Rider and Engine Compartment * •
Cban Debris from Engine Cooling Areas & Air Filter * •
Check Tire Pressure •
Lubricate Rider & Mower * ®
Cban Deck & Check/Replace Mower Blades ®
Cban Battery & Cabbs •
Check Rider Safety System ** • • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE,
8 Hours 25 Hours or 100 Hours 200 Hours 200 500
20HPKoh_er
orDaHy 2Months orAnnuaHy or 2Years Hours Hours
Check Engine Oil Level * ®
Check Air Cleaner & intake * ®
Check/Clean Cooling Fins & intake * •
Service Air Filter * t
Change Oil & Filter * o
Remove Shroud, Clean Cooling Fins * •
Replace Fuel Filter •
Check & Re-Gap / Replace Spark Plug ® ®
Service Starter Drive, Check & Adjust Valve ®
Clearance t
ENGINE MAmNTENANCE,
8 Hours 25 Hours 50 Hours 100 Hours 200 Hours or Yearly
22HP Briggs & Stratton
or Daily or Every or Every or Every Every Season
Season Season Season
Check Engine Oil Level * ®
Service Air Pre-Cleaner * ®
Change Oil * ®
Service Air Filter * •
Change Oil & Filter * •
Clean Cooling Fins * ®
Replace Air Filter * ®
Replace Spark Plugs ®
Replace Fuel Filter •
Check Valve Clearance t •
* More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions,
** Check the function of the safety system after the unit has been stored for 30 days or longer,
t These services should be performed by Sears or other qualified service dealer,
17