Related Manuals for Xterra 1640250
Summary of Contents for Xterra 1640250
- Page 1 Owner’s Manual Model No. 1640250 - Assembly - Operation - Adjustments - Parts - Warranty CAUTION: Read and understand this manual before operating unit Retain For Future Reference...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important Safety Instructions…………………………………………………………….. 2 Important Electrical Information………………………………………………………….. 4 Assembly instructions…………….…………………………………………………………6 Operation of Your Treadmill…………………………………….………………..……….11 Folding Instructions ………………………………………………………………………..15 Part list ………………………………………………………………………………………16 Parts diagram ………………………………………………………………………………19 General Maintenance.……………….………………………………………….…………21 Manufacturer’s Limited Warranty…………………………………………………………25 CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada© 2009... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INFORMATION THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL ▲CAUTION: Before starting any exercise program, it is recommended that you consult your physician. ▲WARNING: Connect this unit to a properly grounded outlet only. ▲DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet immediately after using and before cleaning. -
Page 4: Step
14. Handicapped individuals should have medical approval and close supervision when using this treadmill. 15. Do not place hands or feet under the treadmill. Always keep hands and legs off of the treadmill when others are using it. 16. Never turn on treadmill while standing on treadbelt. Always hold the handrails while using the treadmill. -
Page 5: Important Electrical Information
Important Electrical Information WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. ● Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. NEVER remove any cover without first disconnecting AC power. ●... - Page 6 NEVER operate this treadmill without reading and completely understanding the ● results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your ● desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.
-
Page 7: Assembly Instructions
Assembly Instructions ASSEMBLY PACK CHECK LIST #111 - M5 x 15mm #95 - 5/16” x 19mm Phillips Head Screw (8pcs) Curved Washer (4pcs) #94 - 5/16” x 15mm #110 - 5/16” x 19mm Button Head Socket Bolt (14pcs) Flat Washer (10pcs) #102 - Safety Key (1pc) #93 - Lubricant (1pc) #97 - Combination M5 Allen Wrench... - Page 8 ■ STEP 1 Remove all the parts from the carton and lay the main base frame on a flat level surface. ■ STEP 2 Feed the lower computer cable from the base frame (38) through the right upright (5) and insert the upright (5) into the frame base tube (38).
- Page 9 ■ STEP 3 It will take two people for this step. Connect the lower computer cable (38) to the upper computer cable (36). ■ STEP 4 Attach the console support (6) to the right and left uprights (4 / 5). Secure the console support (6) using six 5/16”...
-
Page 10: Maurice Pincoffs Canada
■ STEP 5 Connect the speed adjustment cable (25) to the back of the console (39). Connect the incline adjustment cable (26) to the back of the console (39). Connect the tow hand pulse wires (27) to the back of the console (39). Secure the console (39) to the console support (6) using four M5 X 15mm screws (111). - Page 11 ■ STEP 6 Attach the left and right covers (43 / 44) to the frame base (2). Secure using four M5 X 15mm screws (111). CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada© 2009...
-
Page 12: Operation Of Your Treadmill
Operation of the monitor GETTING STARTED: ▲CAUTION: Before operating the console, read the following precautions: • Do not stand on the walking belt when turning on the treadmill • Always wear the safety key • Adjust the speed in small increments to avoid sudden jumps in speed •... - Page 13 QUICK START: After the treadmill is powered on and the safety key is in place simply press the START key. The treadmill will start at the minimum speed of 0.5 mph, the time will count up from zero and all data will begin to accrue. You can adjust the speed manually by pressing the Fast and Slow buttons and you can adjust the Incline with the Up and Down buttons.
- Page 14 Speakers: The console has a built-in Speakers. You may Plug an Audio Source (CD player, MP3, Computer ,etc.) into the Jack on the Left side of console. There is no volume control on console, volume must be controlled by Audio Source. PROGRAMS: MANUAL: •...
- Page 15 XTERRA TREADMILL PROFILES CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada© 2009...
-
Page 16: Folding Instructions
Folding Instructions Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. To Fold The Treadmill: ■... -
Page 17: Part List
PARTS LIST DESCRIPTION O'TY 025001 Main Frame 025002 Frame Base 025003 Incline Bracket 025004 Left Upright 025005 Right Upright 025006 Console Support 025007 Outer Slide 025008 Inner Slide 025009 Locking Knob 025010 Frame Cover 025011 Belt Guide 025012 Tread Deck 025013 Tread Belt 025014... - Page 18 DESCRIPTION O'TY 025048 Top Motor Cover 025049 Decor Plate 025050 Front Motor Cover 025051 Footrest (L) 025052 Footrest (R) 025053 Foot Rail 398m/m 025054 Rear Foot Rail 145m/m 025055 Rear Adjustment Base (L) 025056 Rear Adjustment Base (R ) 025057 Rear Foot Cover 025058 Cushion...
- Page 19 DESCRIPTION O'TY 025095 Ø5/16" × 19 × 1.5T_Curved Washer 025096 M5 × 10m/m_Phillips Head Screw 025097 Combination M5 Allen Wrench & Phillips Head Screw Driver 025098 M6_L Allen Wrench 025099 3/8" × 2"_Hex Head Bolt 0250100 3 × 20 m/m_Tapping Screw 0250101 5 ×...
-
Page 20: Parts Diagram
PARTS DIAGRAM CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada© 2009... - Page 21 CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada© 2009...
-
Page 22: General Maintenance
General Maintenance Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the edge of the belt and the area between the belt edge and frame. Also reach as far as practical directly under the belt edge. - Page 23 TREADBELT TRACKING ADJUSTMENT: The performance of your treadmill is dependent on the frame running on a reasonably level surface. If the frame is not level, the front and back roller cannot run parallel, and constant belt adjustment may be necessary. The treadmill is designed to keep the treadbelt reasonably centered while in use.
- Page 24 BELT / DECK LUBRICATION: Do not lubricate with other than Xterra approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Xterra. There are commercially available lube kits, but the only one currently approved by Xterra is Lube-N-Walk.
- Page 25 If an extension cord is required it should be as short as possible and heavy duty 16 gauge minimum. Low household voltage. Contact an electrician or your Xterra dealer. A minimum of 110 volt AC current is required. High belt/deck friction. See General Maintenance Treadmill belt stops quickly/suddenly when section on lubrication.
-
Page 26: Manufacturer's Limited Warranty
All of the parts for the Xterra Treadmill, shown in figure can be ordered from: MAURICE PINCOFFS CANADA INC., 6050 Don Murie Street, Niagara Falls, Ontario L2E 6X8. When ordering parts, the parts will be sent and billed at the current prices.