Setting Date And Time - Panasonic P2HD AG-HPG20 Operating Instructions Manual

Setting date and time

The "CLOCK SETTING" value is recorded on the data content (clips), and it affects the sequence in which
the thumbnails are played back. Before recording, be absolutely sure to check the "CLOCK SETTING" and
"TIME ZONE" settings, and set them if necessary. Described below is the procedure for setting date and
time to 5:20 PM on May 25, 2009.
1
Hold down [POWER] for at least 1 second to
turn the power on.

Press [THUMBNAIL/MODE] to display the
normal display screen.

Press [MENU/MODE CHK].
• Basic operations on the setting menus (Page
88)

At the "TIME ZONE" item on the setting
menu "OTHER FUNCTIONS", change the
time difference from Greenwich Mean Time
using and , and press
OTHER FUNCTIONS
PC MODE SELECT USB HOST
BEEP SOUND
CLOCK SETTING
TIME ZONE
POWER SAVE
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
5
Select "CHANGE" for the "CLOCK
SETTING" item on the setting menu
"OTHER FUNCTIONS" screen.
OTHER FUNCTIONS
PC MODE SELECT USB HOST
BEEP SOUND
CLOCK SETTING RETURN
CHANGE
TIME ZONE
POWER SAVE
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
6
Press or to set "YEAR" to "00".
CLOCK SETTING
YEAR 2009
MONTH APR
DAY 24
HOUR 13
MINUTE 07
+/ - : PUSH /
SEL : PUSH /
PUSH MENU TO RETURN
Any year from 2000 to 2037 can be set.
. (Page 106)
OFF
>>>
0:00
OFF
>>>
OFF
OFF
>>>

Press to move the setting item to
"MONTH".
CLOCK SETTING
YEAR 2009
MONTH APR
DAY
24
HOUR 13
MINUTE 07
+/ - : PUSH /
SEL : PUSH /
PUSH MENU TO RETURN

Press or to set "MONTH" to "MAY".
CLOCK SETTING
YEAR 2009
MONTH MAY
DAY 24
HOUR 13
MINUTE 07
+/ - : PUSH /
SEL : PUSH /
PUSH MENU TO RETURN

Use the same method as in steps  and  to
set "DAY", "HOUR" and "MINUTE".
• The 24-hour clock system is used by this unit.
CLOCK SETTING
YEAR 2009
MONTH MAY
DAY 25
HOUR 17
MINUTE 20
+/ - : PUSH /
: PUSH /
SEL
PUSH MENU TO RETURN
10
Press [MENU/MODE CHK]  times to
return to the normal display screen.
• There may be a time error. Check if the
CLOCK shows the correct time before
shooting.
• If the unit is going to be used overseas, do
not set the "CLOCK SETTING" to the current
time but input the time difference from GMT
using the "TIME ZONE".