Lcd Monitor Settings - Panasonic P2HD AG-HPG20 Operating Instructions Manual

Basic operations (continued)

LCD monitor settings

1
Hold down [POWER] for at least 1 second to
turn the power on.
First check that an image is displayed on the
LCD monitor, and then adjust the angle of the
monitor to the position where it is easiest to see
its displays.

Press [THUMBNAIL/MODE] to display the
normal display screen.

Press [MENU/MODE CHK].
• Basic operations on the setting menus (Page
88)

Using , , and
the "LCD SETTING" item on the setting
menu "DISPLAY SETUP" screen.
DISPLAY SETUP
OSD OUT SEL
DATE/TIME
LEVEL METER
CARD/BATT
P2CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LCD SETTING
PUSH MENU TO RETURN
5
Using and
LCD SETTING
LCD COLOR LEVEL
_
[ ]
LCD BRIGHTNESS
_
[ ]
LCD CONTRAST
_
[ ]
PUSH MENU TO RETURN
LCD COLOR LEVEL:
LCD BRIGHTNESS:
LCD CONTRAST:
• Note that if you set all LCD adjustment values to
minimum, the menu screen will become difficult
to see.
6
, select "CHANGE" for
LCD
OFF
CH1-4
ON
TOTAL
ON
RETURN
CHANGE
, select the item to be set.
[ + ]
[ + ]
[ + ]
This adjusts the color
density of the screen.
This adjusts the screen
brightness.
This adjusts the screen
contrast.
6
Using or , adjust the selected item.
• When [RESET] is pressed, the adjusted values of
the selected items can be restored to their factory
settings.

Press [MENU/MODE CHK]  times to return
to the normal display screen.