Setting The Time - Panasonic RR-XS600 Operating Instructions Manual

Setting the time

When the power is turned on, "
time of purchase). (In power-on condition, the display changes to "
The clock is used for preserving recording date. Please set the time first.
Recording is possible even if the clock is not set. However, the Recording date, Recording start time will be displayed as "
When "
A-B / MENU
•
• Turn the power on ( ➜ page 6).
STOP
Press q / g .
1
Press +, – to set the year and
2
press q / g to enter.
Set month and day in the same way.
Year
The above illustration is a display example.
Press u , i to select the time
3
display and press q / g to enter.
24-hour display
Press +, – to set the time and
4
press q / g to enter.
You can adjust the time quickly by
pressing and holding +, –.
24-hour display
" blinks on the display when the time is not set (e.g. at the
" is blinking
Month Day
12-hour display
12-hour display
" (blinking) in approx. 1 minute.)
When the time display is
" " (blinking) or you change
the time
• Turn the power on ( ➜ page 6).
STOP
• Press to stop the unit.
1
Press and hold
1 second or longer.
" " (blinking) or "
(blinking) is displayed.
2
Press +, – to select "
and press q / g to enter.
If " " blinks, press q / g to enter.
3
Follow step
2
shown at left.
STOP
*
Press to stop the setting process midway.
* The clock operates with the monthly loss/gain
of approx. 60 seconds at normal temperature.
* The time setting is cleared, if the battery has
been consumed completely.
".
A-B / MENU
•
for
"
"
, and
3 4
7