Panasonic P2HD AG-HPG20 Operating Instructions Manual page 96

Memory card portable recorder
Table of Contents

Advertisement

List of setting menus (continued)
TIMECODE SETUP screen (continued)
Item
VITC POS-
HD EMBD VITC
HD EMBD LTC
6
This is used to set the insert position of VITC signal.
(When 59.94 Hz has been set)
10L
I
1L
I
0L
(When 50Hz has been set)
L
I
1L
I
L
<Note>
You cannot select the same line as the lines for "VITC POS-1" on the "TIMECODE
SETUP" screen or "UMID POS" on the "AV OUT SETUP" screen.
This setting is effective only for VIDEO output and SD-SDI output.
This is used to set whether to superimpose the VITC information onto HD-SDI output
or not.
ON:
Superimpose
OFF:
Not superimpose
This is used to set whether to superimpose the LTC information onto HD-SDI output
or not.
ON:
Superimpose
OFF:
Not superimpose
Description of settings
The underlined settings are the factory mode settings.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P2hd ag-hpg20eP2hd ag-hpg20pAghpg20 - p2 gear play/rec

Table of Contents