HD/SD-SDI connection (Page 6)
You can record data on P2 cards by connecting the unit to the external devices equipped with HD/SD-SDI
output. The unit's recording start and stop operations can be performed from some camera recorders.
(When SDI input is selected)
(For supporting devices, refer to page 91)
HD/SD-SDI signal
Using an external hard drive (HDD)
Saving data onto an external hard drive
5
(Page 6)
The data content on P2 cards can be saved onto an external HDD.
Also, the P2 content saved on an external HDD can be reloaded onto a P2 card.
(Only in the USB HOST mode)
•
1394 connection (File transfer) is not supported.
P card
Checking the content saved onto an
6
external hard drive (Page )
The P2 content saved on an external HDD can be played back and checked. (Pulldown playback
(Playback with some images skipped))
(Only in the USB HOST mode)
•
1394 connection (File transfer) is not supported.
•
Both audio and images will not be output to the DVCPRO/DV input/output connector (IEEE1394).
Hard drive
USB .0 cable
AG-HPG0 (this unit)
AG -HP G2
0
AG-HPG0 (this unit)
USB .0 cable
AG -HP G2
0
AG-HPG0 (this unit)
AG -HP G2
0
Hard drive
External monitor
HD/SD-SDI output
Video output/Audio
output
P card
1