Panasonic P2HD AG-HPG20 Operating Instructions Manual page 101

AV OUT SETUP screen (continued)
Item
EMBEDDED AUDIO
AUDIO REF LEVEL
SD SDI AUDIO
VIDEO SETUP
(This item is displayed only
when 59.94 Hz is set)
This is used to set whether to superimpose the audio data onto HD-SDI output and
SD-SDI output.
ON:
Superimpose
OFF:
Not superimpose
This is used to set the normal level.
(AG-HPG0P)
FS-0:
– 20dB
FS-1:
– 18dB
FS-1:
– 12dB
(AG-HPG0E)
FS-0:
– 20dB
FS-1:
– 18dB
FS-1:
– 12dB
This is used to select the audio channel which is superimposed onto SD-SDI when
HD signal is down-converted and output as SD-SDI signal.
CH1-:
CH1-4 is output to CH1-4.
CH5-:
CH5-8 is output to CH1-4.
CH1-:
CH1-8 is output to CH1-8.
The setup level of the video signals during playback is set.
0%:
0% is set as the output setup level.
.5%:
7.5% is set as the output setup level.
Description of settings
The underlined settings are the factory mode settings.
101