Panasonic P2HD AG-HPG20 Operating Instructions Manual page 95

TIMECODE SETUP screen (continued)
Item
VITC BLANK
VITC POS-1
This is used during playback to set whether to output VITC signal to the position set
on the setting menu "VITC POS-1" or "VITC POS-2".
BLANK:
Not output
THRU:
Output
<Note>
This setting is effective only for VIDEO output and SD-SDI output.
This is used to set the insert position of VITC signal.
(When 59.94 Hz has been set)
10L
I
16L
I
0L
(When 50Hz has been set)
L
I
11L
I
L
<Note>
• You cannot select the same line as the lines for "VITC POS-2" on the "TIMECODE
SETUP" screen or "UMID POS" on the "AV OUT SETUP" screen.
• This setting is effective only for VIDEO output and SD-SDI output.
Description of settings
The underlined settings are the factory mode settings.
5