Printing Setpoints And Actual Values - GE MM300 Instruction Manual
Motor management system
low voltage motor protection and control
Hide thumbs
Also See for MM300:
- Manual (158 pages) ,
- Quick start manual (77 pages) ,
- Installation recommendations (21 pages)
Table of Contents
Advertisement
CHAPTER 3: INTERFACING WITH THE MM300
Printing setpoints and
actual values
MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
The EnerVista MM300/MM200 Setup software allows the user to print partial or complete
lists of setpoints and actual values. Use the following procedure to print a list of setpoints:
1.
Select a previously saved setpoints file in the File pane or establish communications
with a MM300 device.
2.
From the main window, select the Offline > Export Settings File menu item.
3.
The Print/Export Options dialog box will appear. Select Settings in the upper section
and select either Include All Features (for a complete list) or Include Only Enabled
Features (for a list of only those features which are currently used) in the filtering
section and click OK.
4.
The process for Offline > Print Preview Settings File is identical to the steps above.
5.
Setpoint lists can be printed in the same manner by right clicking on the desired file (in
the file list) or device (in the device list) and selecting the Print Device Information or
Print Settings File options.
SOFTWARE
3–33
Advertisement
Table of Contents
