Control Page; Popup Windows - GE MM300 Instruction Manual

GRAPHICAL CONTROL PANEL

Control page

Popup windows

3–12
This page is used to view the active control mode and switch between Auto/Manual if the
softkeys are enabled.
Figure 3-17: Typical control page display
Refer to the Control Elements section for details on control page functionality.
There are three types of popup windows:
• Setpoint editor popup windows.
• Help popup windows.
• Invalid operation popup windows.
Refer to the Setpoints chapter for details on setpoint editor popup windows.
Help popup windows are initiated by pressing the HELP key. Refer to the Keypad section
for more information about help popup windows.
Invalid operation popups explain the problem and provide direction on how to rectify it.
This may also include invalid features or uninstalled options (for example, accessing the
undervoltage restart page when undervoltage restart option is not ordered). Where a
keypress is illegal because a security passcode is required, the popup is a passcode entry
dialog box.
Figure 3-18: Typical invalid operation popup window
Help and illegal action popup windows remain open until they are acknowledged by
clicking any soft or hard key, or until a pre-determined period of inactivity has passed.
CHAPTER 3: INTERFACING WITH THE MM300
MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL