MM300 Motor Management System
Chapter 3: Interfacing with the MM300
Graphical control panel
Introduction to the graphical control panel
MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
Interfacing with the MM300
There are three methods of interfacing with the MM300 Motor Management System.
Interfacing via the graphical control panel.
Interfacing via the basic control panel.
Interfacing via the EnerVista MM300 Setup software.
This section provides an overview of the interfacing methods available with the MM300
using the Graphical and Basic control panels. For additional details on interface
parameters (for example, settings, actual values, etc.), refer to the individual chapters.
The MM300 graphical control panel provides the operator with rapid access to relevant
information and controls using intuitive sequences. It also provides all available
information and setting control, again with intuitive sequences.
The central feature of the graphical control panel is a 3.5-inch 320 by 240 pixel backlit
color LCD screen. The panel also contains keys (pushbuttons) that control the display and
perform commands. In addition, the interface contains START A, START B, and STOP direct
acting control pushbuttons.
The display also contains several LED indicators that provide a summary of the machine
status. Details are displayed on the screen when the user navigates to the appropriate