Clearing All Bluetooth Devices Information - Motorola APX 6000XE MODEL 2 User Manual

4 If there are devices being paired or connected,
or along the list of <Device Friendly Name>
to see the status of each device.
If there are no active Bluetooth devices being
paired or connected, the display shows No
devices.
5 Perform one of the following actions:
• To clear the device from the list,
required device, press the Menu Select button
directly below Clr.
• To exit from this function, press the Menu
Select button directly below Back to return to
the previous screen without deleting the device
name.
If Clr is selected, the display shows <Device
Friendly Name> clear?.
6 Press the Menu Select button directly below Yes
or No to proceed delete the device or to exit this
function and return to previous screen..
If the device is deleted successfully, the display
shows <Devlice Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the
radio sounds a short, low-pitched tone. The display
shows <Devlice Friendly Name> clear failed.
The display returns to previous screen.
Note: If Re-Pair Timer is set to infinite and you clear
keys on the radio, you must clear keys on all
previously paired devices as well. (Please see your
accessories manual for further details.)

Clearing All Bluetooth Devices Information

or to the
The following methods are options on how to clear all
Bluetooth devices information. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and
the programmed functions.
• Clearing all Bluetooth devices information via the
preprogrammed Bluetooth On/Off button:
a) Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT
devices cleared.
123
English