Emergency Operation - Motorola APX 6000XE MODEL 2 User Manual

If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen of
Contacts.

Emergency Operation

The Emergency feature is used to indicate a critical
situation.
If the Top (Orange) button is preprogrammed to send
an emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
74
English
Check with your dealer or system administrator for
more information on the programming of this feature.
Each channel can only assigned one of the
Emergency modes above. The radio responds
differently when pressing the preprogrammed
Emergency button in each channel.
Note: To exit emergency at any time, press and hold
the preprogrammed Emergency button for about a
second.
The radio operates in the normal dispatch manner
while in Emergency Call, except if enabled, it returns
to one of the following:
Tactical/Non- The radio sends emergency
Revert alarm and/or make emergency
call on the current selected
channel.
Non-Tactical/ The radio reverts to the
Revert for preprogrammed emergency
Conventional channel to send alarm and/or
system make emergency call.
Non-Tactical/ The radio reverts to the
Revert for preprogrammed emergency
Trunking system