Turning On The Bluetooth Audio (Routing The Audio From The Radio To The Headset) - Motorola APX 6000XE MODEL 2 User Manual

If unsuccessful, the display shows BT profiles
not supported. The display returns to Available
Dev screen.
2 Press Ok to continue pairing the radio and the
device.
The pairing process can be canceled by pressing
the Menu Select button below Cncl.
If successful, the display shows Pairing in
progress,<Device Friendly Name> paired,
Connecting in progress... followed by
<Device Friendly Name>connected. The
display returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will
occur:
•
The display shows <Device Friendly Name>
pair failed (if the PIN numbers are
different).
•
<Device Friendly Name> connect failed
(if the connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio (Routing the Audio
from the Radio to the Headset)
The following methods are options on how to turn on
the Bluetooth audio. The result of all the methods is
the same. You can use the options interchangeably
depending on your preference and the programmed
functions.
• Turning on the Bluetooth audio via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b) or to Bluetooth spkr and press the
Menu Select button directly below On.
The display shows On.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
• Turning on the Bluetooth audio via the
preprogrammed button:
a) To route the audio routing from the radio to the
headset, short press the preprogrammed
button.
You hear a short, medium-pitched tone. The
display shows Headset on.
121
English