Motorola APX 6000XE MODEL 2 User Manual page 121

Bluetooth Authentication PIN of your device if
needed.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned to On
and is set to Discoverable in order to enable your
radio to detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
1 Perform one of the following actions:
• Press the preprogrammed Bluetooth Search
button .
•
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen. or
and press the Menu Select button directly
below On.
If successful, the display shows Searching for
BT devices followed by the names of Bluetooth
devices found, if any. When the search timer
expires, Available Dev screen shows a list of
Bluetooth devices found. To stop the search
before the search timer expires, press the
to Search Devices
preprogrammed Bluetooth Search button or the
Menu Select button below Stop.
If the feature fails to initiate, the radio sounds a
short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button
below Back to return to Bluetooth feature screen,
or press or the Menu Select button below
Exit to return to Home screen.
2 or to the device name and press the Menu
Select button directly below Sel to connect to the
device.
The radio starts pairing to the device.
To continue with Bluetooth pairing, please see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature on page 115.
Turning Bluetooth Visibility On
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
The following methods are options on how to turn
Bluetooth visibility on. The result of all the methods is
the same. You can use the options interchangeably
Pairing
117
English