Switching Between Repeater Or Direct Operation Button; Monitor Feature; Monitoring A Channel - Motorola APX 6000XE MODEL 2 User Manual

7 Press
to return to the Home screen.
See Phone Call Displays and Alerts
more information if your call is NOT answered.
Switching Between Repeater or Direct
Operation Button
The Repeater Operation increases the radio's range
by connecting with other radios through a repeater.
The transmit and receive frequencies are different.
The Direct or "talkaround operation" allows you to
bypass the repeater and connect directly to another
radio. The transmit and receive frequencies are the
same.
Perform one of the following actions:
• Press the preprogrammed Repeater/Direct
switch to toggle between talkaround and
repeater modes.
•
or to Dir and press the Menu Select button
directly below Dir.
The display shows Repeater mode if the radio is
currently in Repeater mode.
58
English
The display shows Direct mode and the Talkaround
icon if the radio is currently in Direct mode (during
conventional operation only).
on page 48 for

Monitor Feature

Radio users who switch from analog to digital radios
often assume that the lack of static on a digital
channel is an indication that the radio is not working
properly. This is not the case.
This digital technology quiets the transmission by
removing the noise from the signal and allows only
the clear voice or data information to be heard.
Use the Monitor feature to make sure a channel is
clear before transmitting.

Monitoring a Channel

The following methods are options on how to monitor
a channel. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
• Monitoring a Channel with Volume Set button.
a) Select the desired zone and channel.
b) Press and hold the Volume Set button to hear
the volume set tone.