Bluetooth Drop Timer - Motorola APX 6000XE MODEL 2 User Manual

Bluetooth Drop Timer

The Bluetooth Drop Timer has two different settings
and functions, depending upon the selection of the
Re-Pair Timer.
Re-Pair Timer
Options
Immediate
(For MCW
Accessories
only)
Infinite (For all
Bluetooth
devices)
114
English
Description
0 – 15 minutes programmable
buffer time to re-establish the
Bluetooth Connection when the
Bluetooth signal is out of range.
If either device powers off, the
pairing keys are immediately
cleared from both devices and the
devices must re-pair.
This Timer only applies to the
accessory. The programmable
timer choices are: 0 – 15 minutes, 2
hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW)
headset and PTT which are
preprogrammed to 8 hours.
Re-Pair Timer Description
Options
This is a "stay alive" time that the
accessory will remain on without
the device reconnecting before
powering off. The radio will remain
on until the user powers the radio
off. The radio and accessory will
remain paired indefinitely. Once the
device re-connect, the timer is
reset.
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data
services. It is depends on the specifications of these
external devices.
Check with your dealer or system administrator for
more information about these timers.
To establish the Bluetooth Connection, see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature on page 115 or
Feature on page 116 .
Pairing
Standard Pairing