Table of Contents
Advertisement
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of the company. Brands and product names are trademarks or registered
trademarks of their respective companies.
The vendor makes no representations or warranties with respect to the contents herein and especially
disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor
reserves the right to revise this publication and to make changes to the contents herein without
obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not
allowed without first obtaining the vendor's approval in writing.
Trademark
All the trademarks or brands in this document are registered by their respective owner.
Disclaimer
We make no warranty of any kind with regard to the content of this user's manual. The content is
subject to change without notice and we will not be responsible for any mistakes found in this user's
manual. All the brand and product names are trademarks of their respective companies.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. However, there is no guarantee that interference will not occur in a
particular installation.
Ver: EG101
K8M800-754 Series
Advertisement
Table of Contents
Related Manuals for Albatron K8M800-754 Series
Summary of Contents for Albatron K8M800-754 Series
-
Page 1: Fcc Compliance Statement
K8M800-754 Series Copyright All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company. - Page 2 K8M800-754 Series ® K8M800/ VT8237 ® Support Socket 754 AMD Athlon 64 Prcessor User Manual Dimensions (ATX form-factor): 210mm x 244mm (WxL) Operating System: ® Supports most popular operating systems: Windows 2000/XP etc.
-
Page 3: Packing List
Things you have to know !!! The images and pictures in this manual are for reference only and may vary with your mainboard configuration which according to different hardware models, third party components and software versions. Unplug your computer AC power when installing components and configuring switches and pins. -
Page 4: Table Of Contents
Table of Contents CHAPTER 1. GETTING STARTED ..............1 ......................1 NTRODUCTION ......................2 PECIFICATION ..................... 5 ONFIGURATION Layout of K8M800-754....................5 ..................6 ARDWARE NSTALLATION CPU Processor Installation ..................6 Memory Installation..................... 7 Back Panel Configuration.................... 9 Front Panel Headers Indication: SW/LED、PWRLED、SPEAKER....... 11 Connectors ......................... -
Page 5: Chapter 1. Getting Started
K8M800-754 Chapter 1. Getting Started Introduction ® Thanks for choosing the K8M800-754 mainboard! It is based on VIA K8M800 Northbridge and ® ® VT8237 Southbridge chipset. It also supports AMD Athlon 64 Processor. The K8M800-754 mainboard provides 2 sockets using 184-pin DDR SDRAM. You can install DDR400/ 333/ 266 (PC3200/ 2700/ 2100) SDRAM, and it supports a total capacity of up to 2GB. -
Page 6: Specification
K8M800-754 Specification Support Socket 754 ® Support AMD Athlon 64 processor Link HyperTransport - supports 16-bit to be capable of operating up to 800 MHz (1600 MT/sec) with a bandwidth of up to 1.6 Gbytes/sec in each direction Chipsets ® Northbridge –... -
Page 7: Universal Serial Bus
K8M800-754 IDE Facilities Support two IDE PCI interface slots Support Ultra ATA 33, Ultra ATA 66, Ultra ATA 100, and Ultra ATA 133 with DMA and PIO mode Support high capacity hard drive disks Universal Serial Bus Support up to eight USB 1.1/ 2.0 ports for USB interface devices On-board Video Graphic Function Support 3D Acceleration Support Ultra-AGP II... - Page 8 K8M800-754 Hardware Monitor Function: Monitors CPU/Chassis Fan Speed Monitors CPU & system Temperature Monitors System Voltage...
-
Page 9: Configuration
K8M800-754 Configuration Layout of K8M800-754 PS2 KB/Mouse Port DDR Socket X2 CPU Socket PC99 Back Panel ATX Power Connector (24-pin for Rev:1.0 P.C.B) CPU FAN ATX 12V Power Connector USB Port ATA 133 IDE Connector SFAN1 (IDE1, IDE2) KBMS/USB Power On Jumper Floppy Connector (JP1) USB Port/... -
Page 10: Hardware Installation
K8M800-754 Hardware Installation This section will assist you quickly in installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage your system components. CPU Processor Installation ® This mainboard supports AMD Athlon 64 processor using a Socket 754. Before building your system, we suggest you to visit the AMD website and review the processor installation procedures. -
Page 11: Memory Installation
K8M800-754 FAN Headers Three power headers are available for cooling fans, which play an important role in maintaining the ambient temperature in yo ur system. CPAN SFAN1 SFAN2 Attention We strongly recommend that you use a CPU fan sink with your CPU. u can attach the CP U fan to the CPUFAN header. - Page 12 K8M800-754 Please refer the table below to setup the memory: Bank 184-pin DDR DIMM Total Me mory Bank 0, 1 (D IMM1) DDR26 6/DDR333/DDR400 DDR 64MB∼1.0GB SDRAM Module Bank 2, 3 (DIMM2) DDR266/DDR333/DDR400 DDR 64MB∼1.0GB SDRAM Module Total System Memory (Max. 2.0GB) 64MB∼2.0GB Modu le Installation...
-
Page 13: Back Panel Configuration
K8M800-754 ack Panel Configuration PS/2 Mouse/ Keyboard Connectors: PS2KB/MS This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below: PS/2 Mouse Assignment Assignment Data +5 V (fused) No connect Clock Ground No connect PS/2 Keyboard erial and Pa a r llel Por... - Page 14 K8M800-754 USB & LAN Ports: There are four USB 2.0/ 1.1 ports on the back panel. These USB ports are used to connect with USB devices, such as keyboard, mice and other USB supported devices. There is also a 10/100 Mbps LAN port available fo you to connect a network.
-
Page 15: Front Panel Headers Indication: Sw/Led、Pwrled、Speaker
K8M800-754 ront Panel Headers Indication: SW/LED、PWRLED、 SPEAKER SPEAKER PWRLED Pin 1 PC_BEE Pin 1 SW/ LED PWR SW RSTSW RST SW PWR SW HDDLED POWERLED PWR LED HD LED Pin 1 D LED (Hard Drive LED Heade ) his header can be connected to an LED on the f ront pan el of a computer case. -
Page 16: Connectors
K8M800-754 onnectors Floppy Drive Connector: FDC he mainboard provides a standard floppy drive connector (FDC) that supports 360K, 720K, 1.2M, 44M and 2.88M floppy disks. This connector supports the floppy drive ribbon cables provided in e packaging. Hard Drive Connectors: IDE1/ I DE2、SATA1/ SATA2 The mainboard has a 32-bit enhanced PCI IDE Controller that supports Ultra ATA 33, Ultra ATA 66, Ultra ATA 100 and Ultra ATA 133. -
Page 17: Jumpers & Headers
K8M800-754 Jumpers & Headers On-board LAN function Enabled/ Disabled: JP2 Closed Function enabled Close Function disabled he word Closed me ans to put the jumper cap s n the header pins.) USB Power On Function Enab led/ Disabled: JP1, JP3 JP1/ Closed Function enabled... - Page 18 K8M800-754 Clear CMOS Setup: JBAT The “Clear CMOS” function is used when you cannot boot your system due to some CMOS problems, such as a password is forgotten. This jumper allows you to reset the CMOS configurations, and then reconfigure it. JBAT Closed Normal function...
-
Page 19: Audio Connectors
K8M800-754 Audio Connectors FRONT AUDIO CD AUDIO IN CD-ROM Audio-In Header: CD-IN This header is used to connect to a CD-ROM / D VD audio cable. Front Panel Audio Header: FRONT AUDIO If your computer case has the embedded audio equipment desi n or you are using an acket (optional). -
Page 20: Slots
K8M800-754 Slots his mainboard provides one AGP slots and three PCI slots. These slots are designed for expansion rds used, in order to complement and enhance the functionality of the mainboard and your system. GP Slot (4X/ 8X): AGP he mainboard is equipped a 2X/ 4X/ 8X Accelerated Graphics Port (AGP) for working with an GA card. -
Page 21: Power Supply Attachments
K8M800-754 Power Supply Attachments ATX Power Connector: ATX_PWR、ATX_12V This mainboard requires two ATX power connectors, one 20-pin connector and one 4-pin connector. Your power supply must have both two connectors. Connect the 4-pin connector first, and then connect another 20-pin connector. Make sure these connectors are set in secure before applying power. -
Page 22: Appendix I: Super 5.1 Channel Audio Effects Setup
K8M800-754 Appendix I: Super 5.1 Channel Audio Effects Setup 1. After into the system, click the audio icon from the Windows screen. 2. Click Speaker Configuration button, you can see the screen like the picture below. 3. You can choice 2, 4 or 6 channels by your speakers. 2 Channels 4 Channels 6 Channels... -
Page 23: Appendix Ii: Sata Raid 0/1 Specification
K8M800-754 Appendix II: SATA RAID 0/1 Specification ntroduction to RAID (Redundant Array of Independent Disks) RAID technology is a sophisticated disk management system that mana ges multiple disk drives, enhancing I/O performance and providing redundancy in order to prevent the loss of data in case any of the individual disks fail.