Front View; Rear View - OWC Mercury Elite Pro Dual Assembly Manual & User Manual

1.4 FRONT VIEW

Power LED — This LED will emit a
light when the Mercury Elite Pro Dual is on.
During drive activity the LED will blink
steadily, and during a rebuild the LED will
pulse blue slowly.
HDD1 / HDD2 LEDs— These LEDs represent
the two hard disk drives (HDDs) inside the
Mercury Elite Pro Dual. During normal activity,
these LEDs will remain off. If one of the hard
drives inside the Mercury Elite Pro Dual fails,
or if one of the drives is removed without the
RAID mode being reset, the corresponding
LED will blink red.

1.5 REAR VIEW

1
MERCURY ELITE PRO DUAL
solid blue
2
3
blue
Power
4
2
HDD1 HDD2
6
5
INTRODUCTION