1.4 FRONT VIEW
1.4.1 LED Indicators
Power — This LED will emit a
when the Elite Pro Dual is on. During drive
activity the LED will
during a rebuild the LED will
HDD1/HDD2 — These LEDs represent
the two hard disk drives (HDDs) inside the
enclosure. During normal activity, these LEDs
will remain off. If one of the hard drives inside
the enclosure fails, or if one of the drives is
removed without the RAID mode being reset,
the corresponding LED will
1.5 REAR VIEW
1
MERCURY ELITE PRO DUAL
solid blue
blink blue
steadily, and
pulse blue
blink
red.
2
3
light
Power
slowly.
4
2
HDD1
HDD2
6
5
INTRODUCTION